So, my computer died a while back and I’m currently having to share a lap top until I can replace mine. You’d think less time on a computer would mean you have heaps more time to get other things done, but for some reason it hasn’t quite worked out that way, but I did get the chance to finish off this piece – a remake, pretty much, or something I attempted a year ago.
One of the first projects I wanted to try my hand at was a chain mail scarf – just a nice, long strip of European 4-in-1. The first time around I used 14 gauge bright aluminium rings, so it was bigger, chunkier and even longer (by about 20cm). It looked ok, but you certainly wouldn’t have been able to call it a piece of jewellery.
These are 21 gauge stainless steel rings with a 5mm OD, meaning the weave is a much finer mesh than the 14 gauge piece. I used around 1600 individual rings, which may or may not sound like a lot, but it’s probably about 5-10cm shorter than my ideal (ran short of rings, but decided it was ‘finished’ after adding the chain tassels).
The main goal was to create something that din’t look too much like a scarf or necklace in particular, but could more than easily be used as either, which was where the first one failed.
I know there’s nothing particularly special about a piece like this – it’s a pretty basic weave and, truth be told, didn’t exactly take many endless hours, but I’m still pretty pleased with it. Plus, about half-way through I had an idea for an E-6-1 version that will (hopefully) be a bit different.