Spiked jewellery is something that has remained fairly consistently popular, and certainly seems to go well with several chain mail weaves, so I had a bit of fun with them recently and thought I’d post a few of the results.
The main image is a necklace that can be worn high for a choker, or lower for a standard necklace. I based this on the Double Vision¹ (aka Barrels) weave, but chose larger rings connecting each of the units so that I could fit the spikes on them (I originally put a spike on each large blue ring but it made the chain just a little to stiff as the spikes take up just a little too much room and push the silver rings slightly outwards). At the centre is a Not Tao 3 unit being used as a bail, and just a very simple alloy metal pendant to set it off.
This bracelet uses the same basic weave and design as the necklace, except that there’s only two rings at the centre of each unit, and the larger connecting rings are slightly bigger, allowing me to attach a spike to each one.
After that, I had a go at some earrings, and made several pairs based on the following basic design.
Each additional pair I made, I used a different bead to adorn them, in between the chain and the spike. They’re all rather simple in terms of design and construction, but I thought the results were quite effective.
1. The Double Vision weave uses two rings at the centre, as shown in the bracelet, and I’m certain there’s a proper name for a weave that uses three rings (as there is for one ring – RSD), I just don’t know what it is and couldn’t seem to find it.