The time since my last post has been a lot longer than I intended, but at least I have (mostly) put that time to good use. Along with learning new weaves, I’ve also been experimenting with different material and techniques.
As may be evident from previous posts, stainless steel is probably the most common material I work with, mostly due to the fact that (in my opinion), it’s the best material for the least outlay, so I thought I’d post a couple of things I’ve worked on recently that use some different materials.
The lighting wasn’t particularly great when I took this picture, but this is Dragonscale made from copper and stainless steel. I really like the look of this weave and immediately had a bunch of other ideas for using it, but have also found it to be one of the most time consuming and material-heavy weaves I’ve learned so far, particularly as the method I used (learned from this tutorial over at CGMaille) adds each ring one at a time. (I did look up a method for speedweaving Dragonscale, but honestly could not wrap my head around the instructions).
The copper rings I bought turned out to be less than ideal for chain mail (although they were advertised as such), which you may be able to see in this Byzantine bracelet.
Despite the flaws of the rings in this piece, the colour of copper seems to suit chain mail work – I favour it over brass and bronze at any rate.
Lastly, while still not quite a fan of gold as a colour, as well as becoming a little disenchanted with aluminium for anything other than decorative components in larger pieces, I made this bracelet in Australia’s official team colours with the upcoming Olympic Games in mind (as an alternative to those disposable rubber bracelets).
I had thought the colour combo was going to be a bit too garish to be passable as a piece of jewellery for any other type of occasion, but I was pleasantly surprised at the overall effect. I’m sure it still has limited appeal, but for my money is a bit more versatile than the silicone wristbands. (As a sidenote, I tried a couple of different Japanese weaves using these colours but they just didn’t suit as much as the butterfly weave).
Still all relatively simple and straightforward, but may give some inspiration to someone else out there.
This bracelet was made using the butterfly chain mail weave, from anodized aluminium rings for the blue and white, and bright aluminium for the silver connecting rings.
The weave can be joined by two rings between each butterfly unit, but I elected to use five for a looser, more flexible chain. This one is finished with a magnetic clasp, which is good for short closures between the chain ends.