I’ve been wanting to make a piece using this weave for a while and finally got around to it last week. I thought the pictures I had seen looked quite masculine, but I think mine turned out a little more on the feminine side – possibly due to ring size.
I used 20 gauge wire for both – the large rings are bright aluminium with a 5mm ID and the smaller rings are jewellery brass with a 3mm ID (ARs of 6.25 and 3.75 respectively). I’m not sure how much smaller I could have gone with the brass rings, but the outside rings are a little loose and flip outwards, giving the units a bit more of a lacier, or flowery, look than I expected (the tutorial I followed to learn this weave is here, and if you check it out, you can see that the weave looks a little more masculine when held together as shown in the CGI images – which, as this is only my second attempt at the weave, I’m not 100% sure is actually possible, but my result may be due to the springback of the brass rings used as they were definitely the recommended size otherwise).
The great thing about Camelot is that if you learn this weave, you basically learn 3 weaves – the basis is Helm (although Helm would have two rings through the centre of the larger rings), which builds to Celtic Visions before becoming Camelot, so a really good way to expand your repertoire.