Not Tao 3 Choker (Green, Black & Silver)
The Not Tao 3 unit has always reminded me a little of the biohazard symbol (not an exact match, I know, but the similarity is enough for me), so when I saw the gas mask pendants I decided to combine the two for a choker.
While I did take a look at this tutorial for Not Tao 3, I din’t have rings in those sizes and also found it easier to construct the units in a different way, which I’ll try to get around to posting soon as I think it would work well for most Not Tao units. (These units use 1.2mm thick stainless steel rings with an 8mm OD, so an AR approximately 4.65, and just the standard AWG 18G – 1.2mm – 3/16’s, AR around 4. They aren’t super rigid on their own, but work well in a chain as they maintain both shape and a little flexibility).
Once I’d made a few units, the first problem to solve was which way to link them together for a nice looking chain – obviously from the image, I went with a very simple 2-1-2 link between each unit, but I do have a habit of overcomplicating things from the outset and first tried to link two points together so that I’d ultimately have to link two to two, then one to one and so on….if that makes sense.
I also tested linking them so that every second unit had the point facing the other way so that it would take on a bit of a zig-zag pattern, but while that could work for a bracelet, it’s ultimately a little awkward for a choker.
I think this would probably look good with some neon green crystals set into the eyes of the mask, or possibly done in red. For an even more elaborate cyber punk look, I’d go for some green spikes attached all the way around.